Red dot mounts for CZ 75 SP-01 Shadow

This collection contains red dot mounts for the CZ 75 SP-01 Shadow. The mount goes into the rear sight dovetail in place of the rear sight. You fit a red dot without milling and without permanent changes, and you can put the rear sight back at any time. Every mount takes one footprint or a group of footprints, so you choose it by the footprint of your red dot. The mounts are not for Optics Ready variants with a factory optic cut.

Footprints for the CZ 75 SP-01 Shadow

• Trijicon RMR: mounts from Zendl, EGW and KMR.
• Shield RMSc: mounts from Zendl, KMR and Shield Sights.
• Docter: a mount from EGW.

Mounts for several footprints

• Outer Impact type C: Trijicon RMR, Docter and C-More RTS.
• Toni System type A: Shield RMSc, Leupold DPP and Docter.
• Toni System type B: Trijicon RMR and C-More RTS.
• EGW type S: Shield RMSc, Holosun K-series and Leupold DPP.
• Eemann Tech: Shield RMSc and Docter.

The type letters differ between makers. Always read the footprints in the brackets.

Material

Outer Impact, Toni System and EGW make their mounts from aluminium. Zendl, KMR and Eemann Tech make their mounts from steel. An aluminium mount is lighter. A steel mount is heavier and robust.

Installation

Drift the rear sight out of the dovetail with a sight pusher or a punch. Push the mount into the dovetail and fix it. Then screw the red dot onto the mount with a drop of threadlocker on each screw. See Installation tools.

All mounts at a glance

For iron sights, see Sights for CZ 75 SP-01 Shadow. For all mounts of this brand, see Red dot mounts for CZ models.

Frequently asked questions

Can I put a red dot on my CZ 75 SP-01 Shadow without an optic cut?

Yes. The mount goes into the rear sight dovetail in place of the rear sight. No milling and no permanent changes.

Can I install the mount at home?

Yes, if you have a sight pusher or a punch.

1. Drift the rear sight out of the dovetail.
2. Push the mount into the dovetail and tighten it.
3. Screw the red dot onto the mount with a drop of threadlocker on each screw.

Which red dots will fit?

It depends on the mount you choose. For the CZ 75 SP-01 Shadow we have mounts for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter and C-More RTS footprints. Find the footprint of your red dot in its specifications and take the mount that names it.

My CZ 75 SP-01 Shadow is Optics Ready. Will these mounts fit?

No. A pistol with a factory optic cut takes an optic plate, not a mount.