Optics ready plates for HS Produkt H11 Optics Ready

This collection contains optic plates for the HS Produkt H11 Optics Ready. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the Springfield Hellcat, see Optics ready plates for Springfield Hellcat.

Footprints for the HS Produkt H11 Optics Ready

• Trijicon RMR: a plate from EGW.
• Holosun K-series: a plate from Night Fision.

Material

EGW makes its plates from aluminium. Night Fision makes its plates from steel. An aluminium plate is lighter. A steel plate is heavier and robust.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Holosun K-series: the Holosun 407K and 507K, EPS Carry and SCS Carry. See Red dots with Holosun K-series footprint.

For all plates of this brand, see Optics ready plates for HS Produkt models.

Frequently asked questions

Can I install an optic plate on my HS Produkt H11 Optics Ready at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my HS Produkt H11 Optics Ready?

It depends on the plate you choose. For the HS Produkt H11 Optics Ready we have plates for the Trijicon RMR and Holosun K-series footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.