Optics ready plates for HK VP9 OR

This collection contains optic plates for the HK VP9 OR. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the HK SFP9 OR, see Optics ready plates for HK SFP9 OR.

Footprints for the HK VP9 OR

• Trijicon RMR: plates from 2BME and EGW.
• Shield RMSc: plates from 2BME and Shield Sights.
• Leupold DPP: a plate from 2BME.
• Docter: plates from EGW and 2BME.
• Holosun 509T: a plate from 2BME.

Plates for several footprints

• EGW type S: Shield RMSc and Leupold DPP.
• Toni System type A: Shield RMSc, Leupold DPP and Docter.
• Toni System type B: Trijicon RMR and C-More RTS.

The type letters differ between makers. Always read the footprints in the brackets.

Material

EGW, 2BME, Toni System and Shield Sights make their plates from aluminium.

Red dot without a plate

The Holosun SCS VP9 / SFP9 fits the optic cut directly, without a plate.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.
• Holosun 509T: the enclosed Holosun 509T.

For iron sights, see Sights for HK VP9 OR. For all plates of this brand, see Optics ready plates for HK models.

Frequently asked questions

Can I install an optic plate on my HK VP9 OR at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my HK VP9 OR?

It depends on the plate you choose. For the HK VP9 OR we have plates for the Trijicon RMR, Shield RMSc, Leupold DPP, Docter, C-More RTS and Holosun 509T footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.

Is there a red dot that fits without a plate?

Yes. The Holosun SCS VP9 / SFP9 goes straight into the optic cut.