Holosun SCS CZ P-10: what is inside the box
We finally got our hands on the new Holosun SCS CZ P-10. Here is how it looks like and what will you find inside the box. What is in the...
Channelwill |
Red dot footprints
Holosun SCS CZ P-10: what is inside the box
-
Holosun 407K X2 footprint compatibility
On which plate or mount to you install Holosun 407K X2? And with which optics can you share the same mount? In this article we look in detail into the Holosun 407K X2...
Channelwill |
-
Holosun 507C X2 footprint compatibility
On which mount or plate can you install Holosun 507C X2? And with which optics can you share the same mount? In this article we look in detail into the...
Channelwill |
-
Optic plate with Holosun K-series footprint finally available for CZ Shadow 2 OR & Compact
We finally got on stock plates that can hold Holosun K-series red dots [listed below] on your optics ready CZ Shadow 2 and CZ Shadow 2 Compact. Thanks to that you...
Channelwill |
-
How to mount Holosun EPS / EPS Carry to CZ Shadow 2 Compact
Very often we receive emails on how to install EPS to Shadow 2 Compact. Instead of answering all of the emails one by one, we decided to make a post...
Paul L. |
-
Vortex Venom footprint standard
Vortex Venom footprint standard consists of two front sockets and two rear sockets. There are also two screw holes in the middle of the sight.
Paul L. |
-
C-More RTS footprint standard
C-more RTS footprint standard consists of two sockets in the front. There are also two screw holes in the lower part of the footprint.
Paul L. |
-
Holosun K-series footprint standard
Holosun K-serie footprint standard consists of two sockets in the front. There are also two screw holes in the lower part of the sight.
Paul L. |
-
Trijicon RMR footprint standard
This standard is used primarily for red dots designed for full size and compact size pistols. As of 2024 the Trijicon RMR footprint standard is still the most used footprint among all red dot...
Paul L. |
-
Shield RMSc footprint standard
Shield RMSc footprint standard consists of four sockets altogether. Two sockets are in the front and sockets are in the rear part of the footprint. There are also two screw...
Paul L. |
-
Red dots with C-More RTS footprint | Optics Spot
C-More is a footprint shared by other manufacturers for their red dots. Compared to Trijicon RMR footprint and Vortex Venom footprint, the footprint of C-More RTS red dot is much...
Paul L. |
-
Red dots with Vortex Venom footprint | Optics Spot
Vortex Venom is a footprint shared by quite a few manufacturers for their red dots. Similarly as Trijicon RMR footprint is not used solely for Trijicon RMR but also for...
Paul L. |
-
Red dots with Trijicon RMR footprint | Optics Spot
Trijicon RMR is one of the most common footprints that many red dot manufacturers use. This footprint secures the red dot to the plate by two pins in the front...
Paul L. |
