![Browning Bar rail Picatinny [acier]](http://www.optics-spot.ca/cdn/shop/files/browning-bar-picatinny-rail-steel-564.webp?v=1774803151&width=1500)
![Browning Bar rail Picatinny [acier]](http://www.optics-spot.ca/cdn/shop/files/browning-bar-picatinny-rail-steel-748.webp?v=1774803155&width=1500)
Ich bin sehr zu frieden und sieht auch noch sehr schön aus pass perfekt zur meine Waffe
![Osight C [red]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Osight_C_red_dot_sight.jpg?v=1767038233)
Plate worked great so far. You’ll probably need an angled shim to zero in your red dot. Seems to be common with CZ.
This mounts is as described. Came with all the screws needed to mount on the slide and to mount the optic. Took about 2 weeks to get to me after submitting the order. Was shipped from the Netherlands. There were no additional fees ( tariff, customs or tax) up arrival.
![Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | Trijicon RMR footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Beretta_92X_92XI_92_GTS_92X_RDO_M9A4_Optics_Ready_plate_Trijicon_RMR_footprint.webp?v=1766068260)
Works great and fits nice
![Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | type B [RMR & RTS footprint]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Beretta_92X_92XI_92_GTS_92X_RDO_M9A4_Optics_Ready_plate_type_B_RMR_RTS_footprints.jpg?v=1766067886)
Did not realize “in stock” meant in stock in Europe, but delivery was fine and great fit on bun.
Great quality perfect fit
Its made by Beretta. What more can I say.
![Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | Docter footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Beretta_92X_92XI_92_GTS_92X_RDO_M9A4_Optics_Ready_plate_Docter_footprint.webp?v=1766068333)
I've had some adapter plates for my other pistols, but this one was a direct Glock MOS to Holosun mount and very low profile. It fit tight but perfectly and the machining is clean. Very pleased with this purchase.
Plate fit perfectly. Was able to install my infitac thermal dot with no problems.
Was a little concerned when I saw it going through customs but it is exactly what I wanted and needed. Wasn’t able to find it anywhere else so I was relieved when this arrived.
I tried to get information about this product from other suppliers but no one could give me a definite response, these guys were awesome and very professional.
The product was exactly what was discussed and fit.
Will definitely purchase from here again.
![Springfield XDM 5.25", HS Produkt SF19 5.25" red dot mount | type B [RMR & RTS footprint]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Springfield_XDM_5.25_HS_Produkt_SF19_5.25_red_dot_mount_type_B_RMR_RTS_footprint.jpg?v=1766822276)
Optic plate install was a precision fit. There were no problems installing the optic plate onto my KMR-L-02 ORCA OR. Awesome pistol now with tge optic plate installed with my C-More RTS3B 2V red dot.
Excellent for my Glock 19 Gen5/Vortex Defender XL. Had some help to fit so straightforward enough. Highly recommend.
![Red dot mount Glock models [G17, G19, G26 & other] | type A [RMSc, DPP, Docter footprint]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Red_dot_mount_Glock_models_G17_G19_G26_other_type_A_RMSc_DPP_Docter_footprint.jpg?v=1766486135)
Perfecte beschrijving van montage plaat. Het is makkelijk te monteren.zeer snel verzonden. Dank aan het hele team!
![FN 509 red dot mount | type C [RMR, RTS, Docter footprint]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/FN_509_red_dot_mount_type_C_RMR_RTS_Docter_footprint.jpg?v=1766485885)
Bei der Montage hat mit ein Vereinskamerad geholfen und auch den Holosun mit montiertes hat gepasst :-)
![Beretta [APX A1 & APX RDO] Optics Ready plate | type G [RMR & RTS footprint]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Beretta_APX_A1_APX_RDO_Optics_Ready_plate_type_F_RMR_RTS_footprints.jpg?v=1766069351)
Toimii ja on todella hyvä lisä. Suosittelen, hauskuus vaan lisääntyy
![Beretta 1301 [Competition & Competition Pro] red dot mount | type B [RMR & RTS footprint]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Beretta_1301_Competition_Competition_Pro_red_dot_mount_type_B_RMR_RTS_footprint.jpg?v=1766415666)
Good quality product, also clear detailed website which is important to choose the right plates.
I had some questions about the delivery and I got immediately feedback so good customer service !
![Beretta [APX A1 & APX RDO] Optics Ready plate | type F [RMSc, DPP, Docter footprint]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Beretta_APX_A1_APX_RDO_Optics_Ready_plate_type_F_RMSc_DPP_Docter_footprints.jpg?v=1766069236)
Like ronseal "does exactly what it says on the tin". Perfect fit to a B14 Wilderness no complaints
![Bergara B14 Short Action Picatinny rail [steel]](https://cdn.shopify.com/s/files/1/0657/2677/5563/products/BergaraB14shortpicatinnyrail.jpg?v=1747399541)
CZ quality wins again . Thanks . Very Happy
![Ruger Mark 22/45 [Competition, Hunter & Target] adjustable sights | luminescent dots](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Ruger_Mark_Competition_Hunter_Target_adjustable_sights_luminescent_dots.jpg?v=1762604584)
Consistent with Phoenix craftsmanship and precision machining, their optic ready plate is an essential component for maximizing the performance of the Drake.
Optics Spot was great in providing in stock notification as opposed to the lackluster service from B&T USA.
In addition, Optics Spot gave real time pertinent information on tracking and delivery.
![Phoenix [Predator, Redback Gen2 & Drake] Optics Ready plate | Trijicon RMR footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Phoenix_Predator_Redback_Gen2_Drake_Optics_Ready_plate_Trijicon_RMR_footprint.webp?v=1766170403)
Really please with this item and with the adaptor plate I purchased it was not problem to fit to my Walther PPQM2. Excellent product and so far so good. Great service from Optics Spot as well.
![Holosun 507K X2 [red]](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Holosun_507K_X2_red.jpg?v=1767107360)
Volendo montare un dot sul mio 986 ho scelto questa base , si adatta perfettamente al castello L, l'unica accortezza che bisongna avere è accorciare di 1 mm la vite posteriore che altrimenti sporge e tocca contro il tanburo.
Per il resto nessun problema, basta svitare la tacca originale senza modificare nulla, una volta fissata non si muove più e accetta perfettamente un dot con impronta RMSc
![Smith & Wesson revolver [686, 629, 19, 66, 586 & other] red dot mount | Shield RMSc footprint](https://cdn.shopify.com/s/files/1/0657/2677/5563/files/Smith_Wesson_revolver_686_629_19_66_586_other_red_dot_mount_Shield_RMSc_footprint.jpg?v=1766819301)